GF Signet P51530-P5 Type 515 Rotor-X Wet-Tap Mount Paddlewheel Flow Sensor

GF Signet Type 515 Rotor-X Paddlewheel Flow Sensor Simple to install with time-honored reliable performance, Georg Fischer Signet Model 515 Rotor-X Flow Sensors are highly repeatable, rugged sensors that offer exceptional value with little or no maintenance. The output signal of the Model 515 is a sinusoidal frequency capable of driving a self-powered flowmeter (Model 5090). The wide dynamic flow range of 0.3 to 6 m/s (1 to 20 ft/s) allows the sensor to measure liquid flow rates in full pipes and can be used in low-pressure systems. The GF Signet Model 515 sensors are offered in a variety of materials for a wide range of pipe sizes and insertion configurations. The many material choices, including PP and PVDF, make this model highly versatile and chemically compatible with many liquid process solutions. Sensors can be installed in up to DN900 (36 in.) pipes using Signet's comprehensive line of custom fittings. These custom fittings, which include tees, saddles, and weldolets, set the sensor to the proper insertion depth into the process flow. The sensors are also offered in configurations for wet-tap requirements. Fields of Application: Pure Water Production Filtration Systems Chemical Production Liquid Delivery Systems Pump Protection Scrubber Systems Water Monitoring Not suitable for gases Advantages: Operating range 0.3 to 6 m/s (1 to 20 ft/s) Wide turndown ratio of 20:1 Highly repeatable output Simple, economical design Installs into pipe sizes DN15 to DN900 (1/2 to 36 in.) Self-powered/no external power required Test certificate included for -X0, -X1 Chemically-resistant materials Standards: RoHS compliant China RoHS Lloyd's Register NSF (P51530-PX version only)